LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> Q45 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Trouble Diagnosis >> CONSULT-II Functions >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to and CONSULT-II CONVERTER data link connector.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  3. Turn ignition switch ON.
  4. Touch "START (NISSAN BASED VHCL)" on display.
  5. Touch "VDC" on display. If "VDC" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".
    CAUTION: When "START (NISSAN BASED VHCL)" is touched immediately after starting engine or turning on ignition switch, "VDC" might not be displayed in the system selection screen. In this case, repeat the operation from step 1.
  6. Touch "DATA MONITOR".
  7. Return to monitor item selection screen, and touch any of "CONTROL UNIT INPUT ITEM", "MAIN ITEM" or "ITEM MENU SELECTION". Refer to "DISPLAY ITEM LIST ".
  8. Touch "START".
  9. Screen of data monitor is displayed.
scientia non olet · About LEMON Manuals