Components Function Description
COMPONENT FUNCTION DESCRIPTION TABLE
| Component | Description |
|---|---|
| VDC/TCS/ABS control unit | Receives the information of various sensor signals, ECM and TCM, and then determines the vehicle driving status. Performs the calculations of target brake fluid pressure, by VDC actuator drive signal output and by engine torque required from the VDC/TCS/ABS control. |
| VDC actuator | Receives the actuator drive signal from VDC/TCS/ABS control unit, and then performs the brake fluid adjustment of each wheel caliper. |
| Yaw rate/side G sensor | Detects the yaw rate and side G of the vehicle. |
| Steering angle sensor | Detects the operating angle and direction of driver steering wheel. |
| Pressure sensor (Integrated in VDC actuator) |
Detects the fluid pressure (driver brake force) in VDC actuator. |
| Wheel sensor | Detects the rotation speed of each wheel. |
| VDC OFF switch | Cancels the VDC/TCS function. |
| ECM | Receives the command from VDC/TCS/ABS control unit, and then performs the controls of throttle motor and injector. |