Consult-II Main Function
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II MAIN FUNCTION TABLE
| Diagnostic test mode | Function | Reference |
|---|---|---|
| WORK SUPPORT | This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT-II. | "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION " |
| SELF-DIAG RESULTS | Self-diagnostic results can be read and erased quickly. | "SELF-DIAG RESULT MODE " |
| DATA MONITOR | Input/Output data in the VDC/TCS/ABS control unit can be read. | "DATA MONITOR MODE " |
| CAN DIAG SUPPORT MNTR | The results of transmit/receive diagnosis of communication can be read. | "CAN DIAGNOSTIC SUPPORT MONITOR " |
| ACTIVE TEST | Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the VDC/TCS/ABS control unit and also shifts some parameters in a specified range. | "ACTIVE TEST " |
| FUNCTION TEST | Performed by CONSULT-II instead of a technician to determine whether each system is "OK" or "NG". | Separate volume "CONSULT-II OPERATION MANUAL (FUNCTION TEST)" |
| ECU PART NUMBER | VDC/TCS/ABS control unit part number can be read. | - |