Inspection Procedure

1. Turn ignition switch OFF and disconnect VDC OFF switch connector M24.
2. Check continuity between VDC OFF switch connector M24 terminal 1 and 2.
   CONTINUITY SPECIFICATION
   
   

   VDC OFF switch	Condition	Continuity
   1, 2	VDC OFF switch ON	Yes
   	VDC OFF switch OFF	No

   Fig 1: Checking Continuity Between VDC OFF Switch Connector M24 Terminal 1 And 2

   

OK or NG 

OK: GO TO 2.

NG: VDC OFF switch is malfunctioning. Replace VDC OFF switch.

1. Disconnect ABS actuator and electric unit (control unit) connector E30.
2. Check continuity between VDC OFF switch connector M24 and ABS actuator and electric unit (control unit) connector E30.
   CONTINUITY SPECIFICATION
   
   

   ABS actuator and electric unit (control unit)	VDC OFF switch	Continuity
   31	1	Yes
   	Ground	No
   Ground	2	Yes

   Fig 2: Checking Continuity Between VDC OFF Switch Connector M24 And ABS Actuator And Electric Unit

   

OK or NG 

OK: INSPECTION END

NG: Repair or replace malfunctioning components.