CONSULT-II Function (RAS/HICAS): Function
CONSULT-II can display each self-diagnostic item using the diagnostic test modes shown following.
CONSULT-II FUNCTION REFERENCE CHART
| Diagnostic test mode | Function | Reference |
|---|---|---|
| SELF-DIAG RESULTS | Receives self-diagnosis results from RAS control unit and indicates DTCs. | "SELF-DIAG RESULT MODE " |
| DATA MONITOR | Receives input/output signals from RAS control unit and indicates and stores them to facilitate locating cause of malfunctions. | "DATA MONITOR MODE " |
| CAN DIAG SUPPORT MNTR | Monitors transmitting/receiving status of CAN communication. | "CAN DIAGNOSTIC SUPPORT MONITOR " |
| ACTIVE TEST | Sends command to RAS actuator to change output signals and check operation of output system. | "ACTIVE TEST MODE " |
| ECU PART NUMBER | Displays RAS control unit part number. | "RAS CONTROL UNIT PART NUMBER " |