Operation Condition

OPERATION CONDITION TABLE

Power supply position	Engine start/stop condition		Push-button ignition switch operation frequency
Power supply position	Brake pedal	Selector lever position	Push-button ignition switch operation frequency
LOCK → ACC	Not depressed	Any position	1
LOCK → ACC → ON	Not depressed	Any position	2
LOCK → ACC → ON → OFF	Not depressed	Any position	3
LOCK → START ACC → START ON → START (Engine start)	Depressed	P or N position (*1)	1 [If the switch is pressed once, the engine starts from any power supply position (LOCK, ACC, and ON)]
Engine is running → OFF (Engine stop)	-	P position	1
Engine is running → ACC (Engine stop)	-	Any position other than P (*2)	1
Engine stall return operation while driving	-	N position	1
1: When the selector lever position is N position, the engine start condition is different according to the vehicle speed. At vehicle speed of less than 4 km/h (2.5 MPH), the engine can start only when the brake pedal is depressed. At vehicle speed of 4 km/h (2.5 MPH) or more, the engine can start even if the brake pedal is not depressed. (It is the same as "Engine stall return operation while driving".) 2: When the selector lever position is in any position other than P position and when the vehicle speed is 5 km/h (3.1 MPH) or more, the engine stop condition is different. Press and hold the push-button ignition switch for 2 seconds or more. (When the push-button ignition switch is pressed for too short a time, the operation may be invalid, so properly press and hold to prevent an incorrect operation.) Press the push-button ignition switch 3 times or more within 1.5 seconds. (Emergency stop operation)