Component Inspection (Cooling Fan Relay)

1. Turn ignition switch OFF.
2. Remove cooling fan relay.
3. Check the continuity between cooling fan relay terminals under the following conditions.
   CONTINUITY SPECIFICATIONS
   
   

   Terminals	Conditions	Continuity
   3 and 5	12 V direct current supply between terminals 1 and 2	Existed
   	No current supply	Not existed

   Fig 1: Checking Cooling Fan Relay

   Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace cooling fan relay.