Battery Saver System

When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge.

• The ignition switch is in the ACC position
• All doors are closed
• Selector lever is in the P position

Reset Condition of Battery Saver System

In order to prevent the battery from discharging, the battery saver system will cut off the power supply when all doors are closed, the selector lever is on P position and the ignition switch is left on ACC position for 60 minutes. If any of the following conditions are met the battery saver system is released and the steering will change automatically to lock position from OFF position.

• Opening any door
• Operating with door key cylinder on door lock
• Operating with request switch on door lock
• Operating with Intelligent Key on door lock

Press push-button ignition switch and ignition switch will change to ACC position from OFF position.