Consult-III Main Function
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC TEST MODES
| Diagnostic test mode | Function |
|---|---|
| WORK SUPPORT | This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT-III. |
| SELF-DIAG RESULTS | Self-diagnostic results can be read and erased quickly. |
| DATA MONITOR | Input/Output data in the ABS actuator and electric unit (control unit) can be read. |
| CAN DIAG SUPPORT MNTR | The results of transmit/receive diagnosis of communication can be read/ |
| ACTIVE TEST | Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range. |
| FUNCTION TEST | Performed by CONSULT-III instead of a technician to determine whether each system is "OK" or "NG". |
| ECU PART NUMBER | ABS actuator and electric unit (control unit) part number can be read. |