System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
IPDM E/R integrated relays cannot be removed.
IPDM E/R INPUT/OUTPUT SIGNAL REFERENCE
| Control relay | Input/output | Transmit unit | Control part | Reference | ||
|---|---|---|---|---|---|---|
|
|
BCM (CAN) |
|
B26E1 NO RECEPTION OF ENGINE STATUS SIGNAL | ||
| Front fog lamp relay | Front fog light request signal | BCM (CAN) | Front fog lamp | FRONT FOG LAMP SYSTEM | ||
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING, LICENSE PLATE AND TAIL LAMPS SYSTEM , ILLUMINATION CONTROL SYSTEM | ||
|
Front wiper request signal | BCM (CAN) | Front wiper | C1734 CONTROL UNIT | ||
| Front wiper auto stop signal | Front wiper motor | |||||
|
|
BCM (CAN) |
|
COMPONENT DESCRIPTION | ||
|
Starter control relay signal | BCM (CAN) | Starter motor | B210B STARTER CONTROL RELAY , B210D STARTER RELAY | ||
| Steering lock unit condition signal | Steering lock unit | |||||
| Starter relay control signal | TCM | |||||
| Clutch interlock switch | ||||||
| Steering lock relay | Steering lock relay signal | BCM (CAN) | Steering lock unit | B2108 STEERING LOCK RELAY | ||
| Steering lock unit condition signal | Steering lock unit | |||||
| A/T device (Detention switch) signal | A/T device (Detention switch) | |||||
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (magnet clutch) | MAGNET CLUTCH | ||
| Ignition relay | Ignition switch ON signal | BCM (CAN) | Ignition relay | B2098 IGNITION RELAY ON STUCK | ||
| Vehicle speed signal | Unified meter and A/C amp. (CAN) | |||||
| Push-button ignition switch signal | Push-button ignition switch | |||||
|
NOTE:
|
||||||