Component Inspection (Cooling Fan Relay)

1. Turn ignition switch OFF.
2. Remove cooling fan relay.
3. Check the continuity between cooling fan relay terminals under the following conditions.
   TERMINALS CONTINUITY REFERENCE
   
   

   Terminals	Conditions	Continuity
   3 and 5	12V direct current supply between terminals 1 and 2	Existed
   	No current supply	Not existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace cooling fan relay.

Fig 1: Identifying Cooling Fan Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.