Component Inspection

1. Turn ignition switch OFF.
2. Reconnect all harness connectors disconnected.
3. Turn ignition switch ON.
4. Check the voltage ECM harness connector and ground.
   TERMINALS VOLTAGE REFERENCE
   
   

   ECM		Ground	Condition		Voltage
   Connector	Terminal
   M107	97 (APP sensor 1)	Ground	Accelerator pedal	Fully released	0.5 - 1.0V
   				Fully depressed	4.2 - 4.8V
   	98 (APP sensor 2)			Fully released	0.25 - 0.50V
   				Fully depressed	2.0 - 2.5V

Is the inspection result normal? 

YES: INSPECTION END

NO: GO TO 2.

1. Replace accelerator pedal assembly.
2. Go to "SPECIAL REPAIR REQUIREMENT ".

   INSPECTION END