Battery Saver System

When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge.

• The ignition switch is in the ACC position
• All doors are closed
• A/T selector lever is in the P position

Reset Condition of Battery Saver System

A/T models 

In order to prevent the battery from discharging, the battery saver system will cut off the power supply when all doors are closed, the selector lever is on P position and the ignition switch is left on ACC position for 1 hour. If any of the following conditions are met the battery saver system is released and the steering will change automatically to lock position from OFF position.

• Opening any door
• Operating with request switch on door lock
• Operating with Intelligent Key on door lock

Press push-button ignition switch and ignition switch will change to ACC position from OFF position.

M/T models 

If any of the conditions above is met the battery saver system is released but the steering will not lock. In this case, the steering operation OFF to LOCK is prohibited.