Detailed Flow

COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

GO TO 2.
PERFORM THE SELF-DIAGNOSIS
Check the DTC display with the self-diagnosis function.

Is there any DTC displayed?

YES: GO TO 3.

NO: GO TO 4.
PERFORM THE SYSTEM DIAGNOSIS
Perform the diagnosis applicable to the displayed DTC. Refer to "DTC NO. INDEX ".

GO TO 7.
CHECK THE SYMPTOM THAT IS NOT CONSIDERED A SYSTEM MALFUNCTION
Check that the symptom is a normal operation that is not considered a system malfunction. Refer to "DESCRIPTION ".

Is the symptom a normal operation?

YES: INSPECTION END

NO: GO TO 5.
CHECK THE WARNING LAMP AND INDICATOR LAMP FOR ILLUMINATION
Check that the warning lamp and indicator lamp illuminate.
- ABS warning lamp: Refer to "DESCRIPTION ".
- Brake warning lamp: Refer to "DESCRIPTION ".
- VDC OFF indicator lamp: Refer to "DESCRIPTION ".
- SLIP indicator lamp: Refer to "DESCRIPTION ".
  Is ON/OFF timing normal?
  
  YES: GO TO 6.
  
  NO: GO TO 2.
PERFORM THE DIAGNOSIS BY SYMPTOM
Perform the diagnosis applicable to the symptom.

GO TO 7.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.

GO TO 8.
FINAL CHECK
Perform the self-diagnosis again, and check that the malfunction is repaired completely. After checking, erase the self-diagnosis memory. Refer to "CONSULT-III FUNCTION ".

Is no other DTC present and the repair completed?

YES: INSPECTION END

NO: GO TO 3.