Diagnosis Procedure

Check front and rear brake force distribution using a brake tester. Refer to "GENERAL SPECIFICATIONS ".

Is the inspection result normal? 

YES: GO TO  2.

NO: Check brake system.

Make sure that there is no excessive play in the front and rear axles.

• Front: Refer to "INSPECTION ".
• Rear: Refer to "INSPECTION ".

Is the inspection result normal? 

YES: GO TO  3.

NO: Repair or replace malfunctioning components.

Check the following.

• Wheel sensor installation for damage.
• Sensor rotor installation for damage.
• Wheel sensor connector connection.
• Wheel sensor harness inspection.

Is the inspection result normal? 

YES: GO TO  4.

NO:

• Replace wheel sensor or sensor rotor.
• Repair harness.

Make sure that the ABS warning lamp is turned off after the ignition switch is turned ON or when driving.

Is the ABS warning lamp illuminated? 

YES: Perform self-diagnosis. Refer to "CONSULT-III FUNCTION ".

NO: Normal