Seat DTCS: B2112-B2128
B2112-B2128
| CONSULT display | DTC detection condition |
| B2112: SEAT SLIDE | When any manual and automatic operations are not performed, if any motor operations of seat slide is detected for 0.1 second or more, status is judged "Output error". |
| B2113: SEAT RECLINING | When any manual and automatic operations are not performed, if any motor operations of seat reclining is detected for 0.1 second or more, status is judged "Output error". |
| B2118: STRG TILT SENSOR | When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from tilt sensor for 0.5 seconds or more. |
| B2119: STEERING TELESCO | When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from telescopic sensor for 0.5 seconds or more. |
| B2126: DETENT SW | With the A/T selector lever in P position (Detente switch OFF), if the vehicle speed of 7 km/h (4 MPH) or higher was input the detention switch input system is judged malfunctioning |
| B2128: UART COMM | Malfunction is detected in UART communication. |