Detailed Flow

Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

GO TO 2

Check the DTC display with the self-diagnosis function. Refer to "CONSULT-III FUNCTION (ABS) ".

Is there any DTC displayed? 

YES: GO TO 3

No: GO TO  4

Perform the diagnosis applicable to the displayed DTC. Refer to "DTC NO. INDEX ".

GO TO  7

Check that the symptom is a normal operation that is not considered a system malfunction. Refer to "DESCRIPTION ".

Is the symptom a normal operation? 

YES: Inspection End

No: GO TO 5

Check that the warning lamp and indicator lamp illuminate.

• ABS warning lamp: Refer to "DESCRIPTION ".
• Brake warning lamp: Refer to "DESCRIPTION ".
• VDC OFF indicator lamp: Refer to "DESCRIPTION ".
• SLIP indicator lamp: Refer to "DESCRIPTION ".

  Is ON/OFF timing normal? 

  YES: GO TO 6

  No: GO TO  2

Perform the diagnosis applicable to the symptom.

GO TO 7

Repair or replace the specified malfunctioning parts.

GO TO 8

Perform the self-diagnosis again, and check that the malfunction is repaired completely. After checking, erase the self-diagnosis memory. Refer to "CONSULT-III FUNCTION (ABS) ".

Is no other DTC present and the repair completed? 

YES: Inspection End

No: GO TO  3