LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Component Testing >> Fuel Pump >> Component Inspection (Fuel Pump)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Fuel Pump)

  1. CHECK FUEL PUMP
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump (main)" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump (main)" terminals as follows.
      TERMINAL RESISTANCE CHART

      Terminals Resistance
      1 and 3 0.2 - 5.0 Ω [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump (main)"

      Fig 1: Checking Resistance Between Fuel Level Sensor Unit And Fuel Pump Terminals 1 And 3
      G04875487Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals