With Consult-III
- Turn ignition switch ON and wait at least 10 seconds.
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to
"DIAGNOSIS PROCEDURE ".
If 1st trip DTC is not detected, go to the following step.
- Select "COOLAN TEMP/S" in "DATA MONITOR" mode with CONSULT-III.
- Check "COOLAN TEMP/S" indication.
If "COOLAN TEMP/S" indication is less than 60°C (140°F), the result will be OK.
If "COOLAN TEMP/S" indication is above 60°C (140°F), go to the following step.
- Cool engine down until "COOLAN TEMP/S" indication is less than 60°C (140°F).
- Wait at least 10 seconds.
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".