Diagnosis Procedure

1. Start engine and let it idle.
2. Listen for an intake air leakage after the mass air flow sensor.

OK or NG 

OK: GO TO 2.

NG: Discover air leakage location and repair.

1. Stop engine.
2. Replace ECM.
3. Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to "ECM RE-COMMUNICATING FUNCTION ".
4. Perform "VIN REGISTRATION ".
5. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
6. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
7. Perform "IDLE AIR VOLUME LEARNING ".

INSPECTION END