LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0460 To P1421 >> DTC P1140, P1145 IVT Control Position Sensor >> Component Inspection >> Intake Valve Timing Control Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Valve Timing Control Position Sensor

  1. Disconnect intake valve timing control position sensor harness connector.
  2. Loosen the fixing bolt of the sensor.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Intake Valve Timing Control Position Sensor
    G04900154Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown below.
    RESISTANCE REFERENCE CHART

    Terminal No. (Polarity) Resistance [at 25°C (77°F)]
    3 (+) - 1 (-) Except 0 or ∞ Ω
    2 (+) - 1 (-)
    3 (+) - 2 (-)
  6. If NG, replace intake valve timing control position sensor.
Fig 2: Checking Resistance
G04900155Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals