Procedure For Malfunction B
- Start engine and warm it up to normal operating temperature.
- Maintain the following conditions for at least 10 consecutive seconds.ENGINE SPEED SPECIFICATION
Engine speed 1, 700 - 3, 175 RPM (A constant rotation is maintained.) Engine coolant temperature 70 - 105°C (158 - 221°F) Selector lever 1st or 2nd position Driving location uphill Driving vehicle uphill
(Increased engine load will help maintain the driving conditions required for this test.) - Check 1st trip DTC.
- If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".