With Consult-III
- Turn A/C switch OFF.
- Turn blower fan switch OFF.
- Turn ignition switch ON.
- Select "COOLAN TEMP/S" in "DATA MONITOR" mode with CONSULT-III.
- Check that the "COOLAN TEMP/S" is above 56°C (133°F).
If it is below 56°C (133°F), go to next step.
If it is above 56°C (133°F), cool down the engine to less than 56°C (133°F). Then go to next steps.
- Start engine and drive vehicle for 10 consecutive minutes under the following conditions.VEHICLE SPEED SPECIFICATION
VHCL SPEED SE More than 56 km/h (35 MP) If "COOLAN TEMP/S" increases to more than 75°C (167°F) within 10 minutes, turn ignition switch OFF because the test result will be OK .
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".