LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Service Information >> Engine Control System >> Electronic Ignition (EI) System >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed(2)
Piston position		 Ignition timing control Power transistor
Camshaft position sensor (PHASE)
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Throttle position sensor Throttle position
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(2)
Knock sensor Engine knocking
TCM Gear position
Unified meter and A/C amp. Vehicle speed(1)
(1) This signal is sent to the ECM via the CAN communication line.
(2) ECM determines the start signal status by the signals of engine speed and battery voltage.
scientia non olet · About LEMON Manuals