LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing >> Fuel Pump >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK FUEL PUMP
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump (main)" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump (main)" terminals as follows.
    RESISTANCE SPECIFICATION

    Terminals Resistance
    1 and 3 0.2 - 5.0 Ω [at 25°C (77°F)]

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace "fuel level sensor unit and fuel pump (main)"