LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing >> ICC Brake Switch >> Component Inspection (ICC Brake Hold Relay)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (ICC Brake Hold Relay)

  1. CHECK ICC BRAKE HOLD RELAY
    1. Turn ignition switch OFF.
    2. Remove ICC brake hold relay.
    3. Check the continuity between ICC brake hold relay terminals under the following conditions.
    CONTINUITY SPECIFICATION

    Terminal Condition Continuity
    3 and 4 12 V direct current supply between terminal 1 and 2 Not existed
    No current supply Existed
    6 and 7 12 V direct current supply between terminal 1 and 2 Existed
    No current supply Not existed
    Fig 1: Identifying ICC Brake Hold Relay Connector Terminals
    G07165128Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace ICC brake hold relay.

scientia non olet · About LEMON Manuals