Malfunction Indicator Lamp: Description

The Malfunction Indicator Lamp (MIL) is located on the combination meter.

The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check.

When the engine is started, the MIL should go off. If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.

For details, refer to "DIAGNOSIS DESCRIPTION : MALFUNCTION INDICATOR LAMP (MIL) ". Component Function Check

Fig 1: Identifying Malfunction Indicator Lamp

Courtesy of NISSAN MOTOR CO., U.S.A.

1. CHECK MIL FUNCTION
   1. Turn ignition switch ON.
   2. Check that MIL lights up.

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Go to "DIAGNOSIS PROCEDURE ".