CONSULT-III Function: Function
DIAGNOSTIC TEST MODE FUNCTION
| Diagnostic test mode | Function | ||
|---|---|---|---|
| Work support | This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT-III unit. | ||
| Self-diagnostic result | Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.(1) | ||
| Data monitor | Input/Output data in the ECM can be read. | ||
| CAN diagnostic support monitor | The results of transmit/receive diagnosis of CAN communication can be read. | ||
| Active test | Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ECMs and also shifts some parameters in a specified range. | ||
| DTC&SRT confirmation | The status of system monitoring tests and the self-diagnosis status/results can be confirmed. | ||
| Function test | This mode is used to inform customers when their vehicle requires periodic maintenance. | ||
| ECU identification | ECM part number can be read. | ||
|
|||
Diagnostic trouble codes
1st trip diagnostic trouble codes
Freeze frame data
1st trip freeze frame data
System readiness test (SRT) codes
Test values