LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0130 Through P0445 >> DTC P0196: EOT Sensor >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK ENGINE OIL TEMPERATURE (EOT) SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect EOT sensor harness connector.
    3. Remove EOT sensor. Refer to "2WD : EXPLODED VIEW ".
    4. Check resistance between EOT sensor terminals by heating with hot water as shown in the illustration.
    RESISTANCE SPECIFICATION

    Terminals Condition Resistance (kΩ)
    1 and 2 Temperature [°C (°F)] 20 (68) 2.10 - 2.90
    50 (122) 0.68 - 1.00
    90 (194) 0.236 - 0.260
    Fig 1: Checking Resistance Between Engine Coolant Temperature Sensor Terminals With Heating
    G07165039Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

  2. CHECK INTERMITTENT INCIDENT

    Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals