Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SNOW MODE SWITCH

Turn ignition switch OFF.
Disconnect snow mode switch harness connector.
Check the continuity between snow mode switch terminals under the following conditions.

CONTINUITY SPECIFICATION

Terminals	Condition		Continuity
1 and 4	Snow mode switch	ON	Existed
1 and 4	Snow mode switch	OFF	Not Existed

Is the inspection result normal?

YES: INSPECTION END.

NO: Replace snow mode switch.