With Consult-III
- To locate the EVAP leak, install EVAP service port adapter and pressure pump to EVAP service port.
- Turn ignition switch ON.
- Select the "EVAP SYSTEM CLOSE" of "WORK SUPPORT" mode with CONSULT-III.
- Touch "START". A bar graph (Pressure indicating display) will appear on the screen.
- Apply positive pressure to the EVAP system until the pressure indicator reaches the middle of the bar graph.
- Remove EVAP service port adapter and hose with pressure pump.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Locate the leak using a leak detector. Refer to
"EVAPORATIVE EMISSION SYSTEM : SYSTEM DIAGRAM
".
Courtesy of NISSAN MOTOR CO., U.S.A.