LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Engine Control System - Component Testing) >> Removal And Installation >> VVEL Control Module >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove hoodledge cover (RH) and cowl top cover (RH). Refer to "EXPLODED VIEW ".
  2. Remove the battery and battery tray. Refer to "EXPLODED VIEW ".
  3. Remove VVEL control module bracket bolts (A).
  4. Remove the ground harness fix bolt (B).
  5. Remove VVEL control module bracket (1).
    Fig 1: Identifying VVEL Control Module Bracket And Ground Harness Fix Bolts
    G07020203Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Disconnect VVEL control module harness connector.
  7. Remove the fix bolts (A). And then separate VVEL control module (1), ground harness (2) and VVEL control module bracket (3).
    Fig 2: Identifying VVEL Control Module, Ground Harness & VVEL Control Module Bracket
    G07020204Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals