Component Function Check

WITH CONSULT-III

1. Start engine.
2. Check "FUEL PRES SEN V" in "DATA MONITOR" mode with CONSULT-III.
   MONITOR ITEM CONDITION
   
   

   Monitor Item	Condition	Values/Status
   FUEL PRES SEN V	Engine speed: Idle	980 - 1, 200 mV
   	Engine speed: Revving engine from idle to 4, 000 RPM quickly	1, 100 - 2, 900 mV

WITHOUT CONSULT-III

1. Start engine.
2. Check the voltage between ECM harness connector and ground.
   VOLTAGE SPECIFICATION
   
   

   ECM				Condition	Voltage
   +		-
   Connector	Terminal	Connector	Terminal
   F110	105	E80	175	[Engine is running] Warm-up condition Idle speed NOTE: The pulse cycle changes depending on RPM at idle	BATTERY VOLTAGE (11 - 14 V)* Courtesy of NISSAN MOTOR CO., U.S.A.
   				[Engine is running] Warm-up condition Engine speed: 2, 000 RPM	BATTERY VOLTAGE (11 - 14 V)* Courtesy of NISSAN MOTOR CO., U.S.A.

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".