Diagnosis Procedure
- CHECK GROUND CONNECTION
- Turn ignition switch OFF.
- Check ground connection M95. Refer to Ground Inspection in
"CIRCUIT INSPECTION
".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace ground connection.
- CHECK ACCELERATOR PEDAL POSITION (APP) SENSOR 1 POWER SUPPLY CIRCUIT
- Disconnect APP sensor harness connector.
- Turn ignition switch ON.
- Check the voltage between APP sensor harness connector and ground.
APP sensor Ground Voltage (V) Connector Terminal E112 (Without ICC) 5 Ground Approx. 5 E116 (With ICC) Is the inspection result normal?
YES: GO TO 7.
NO: GO TO 3.
- CHECK SENSOR POWER SUPPLY CIRCUITS
Check harness for short to power and short to ground, between the following terminals:
ECM Sensor Connector Terminal Name Connector Terminal F101 43 Electric throttle control actuator (bank 2) F27 1 44 Electric throttle control actuator (bank 1) F6 6 F102 60 Camshaft position (CMP) sensor (bank 1) F5 1 Exhaust valve timing (EVT) control position sensor (bank 1) F4 1 Power steering pressure (PSP) sensor F35 3 M107 99 APP sensor E112 (Without ICC) 5 E116 (With ICC) Is the inspection result normal?
YES: GO TO 4.
NO: Repair short to ground or short to power in harness or connectors.
- CHECK COMPONENTS
Check the Following:
- CMP sensor (bank 1) (Refer to "COMPONENT INSPECTION ".)
- EVT control position sensor (bank 1) (Refer to "COMPONENT INSPECTION ".)
- PSP sensor (Refer to
"COMPONENT INSPECTION ".)
Is the inspection result normal?
YES: GO TO 5.
NO: Replace malfunctioning component.
- CHECK THROTTLE POSITION (TP) SENSOR
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 9.
NO: GO TO 6.
- REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
Replace electric throttle control actuator. Refer to "EXPLODED VIEW ".
: INSPECTION END
- CHECK APP SENSOR
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 9.
NO: GO TO 8.
- REPLACE ACCELERATOR PEDAL ASSEMBLY
Replace accelerator pedal assembly. Refer to "MODELS WITHOUT DISTANCE CONTROL ASSIST SYSTEM: REMOVAL AND INSTALLATION " (without distance control assist) or "MODELS WITH DISTANCE CONTROL ASSIST SYSTEM: REMOVAL AND INSTALLATION " (without distance control assist).
: INSPECTION END
- CHECK INTERMITTENT INCIDENT
Perform "INTERMITTENT INCIDENT ".
: INSPECTION END