Component Inspection
WARNING: This page is about a different car, the 2012 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SNOW MODE SWITCH
- Turn ignition switch OFF.
- Disconnect snow mode switch harness connector. Refer to "REMOVAL AND INSTALLATION ".
- Check the continuity between snow mode switch terminals as per the following conditions:
Terminals Condition Continuity 1 and 4 Snow mode switch ON Existed OFF Not Existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace snow mode switch. Refer to "REMOVAL AND INSTALLATION ".