Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HOOD SWITCH

Turn ignition switch OFF.
Disconnect hood switch connector.
Check continuity between hood switch terminals.

CONTINUITY SPECIFICATION

Hood switch		Condition		Continuity
Terminal		Condition		Continuity
1	2	Hood	Close	Not existed
1	2	Hood	Open	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace hood lock (RH). Refer to "REMOVAL AND INSTALLATION ".