CONSULT-III Function: Function

CONSULT-III can display each diagnostic item using the diagnostic test modes shown in the following chart:

DIAGNOSTIC TEST MODE FUNCTION CHART

Diagnostic test mode

Function

ECU identification

E-SUS control unit part number can be read.

Self-diagnosis result

Self-diagnostic results can be read and erased quickly. ⁽¹⁾

Data monitor

Input/Output data in the E-SUS control unit can be read.

Active test

CONSULT-III drives some actuators via E-SUS, and changes some command signal values within the specified range.

⁽¹⁾	If the memory in E-SUS control unit is erased, the DTC diagnosis result is also erased.