LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> FX50 >> Repair and Diagnosis >> Transmission >> Transfer Case >> System Description >> Diagnosis System (AWD Control Unit) >> CONSULT Function >> Active Test >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test: Description

Use this mode to determine and identify the details of a malfunction based on self-diagnostic results or data monitor. AWD control unit gives drive signal to actuator with receiving command from CONSULT to check operation of actuator.

TEST ITEM LIST

Test item Condition Description
ETS S/V
(Detects AWD solenoid)
  • Vehicle stopped
  • Engine running
  • No DTC detected
Change command current value to AWD solenoid, and then change driving mode. (Monitor value is normal if it is within Approx. ±10% of command value.)
  • Qu: Increase current value in increments of 0.2 A
  • Qd: Decrease current value in increments of 0.2 A
  • UP: Increase current value in increments of 0.02 A
  • DOWN: Decrease current value in increments of 0.02 A
CAUTION: Never energize continuously for a long time.