Check Anti-Pinch Function: Description

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function.

Disconnection and connection of 12V battery cable from negative terminal.
When power window main switch replaced.
Electric power supply to power window main switch or power window motor (driver side) is interrupted by blown fuse or disconnection and connection of the negative terminal of 12V battery, etc.
Disconnection and connection of power window main switch harness connector.
Removal of power window motor (driver side) from regulator assembly.
Operation of regulator assembly as an independent unit.
Removal and installation of glass.
Removal and installation of door glass run.