BCM: Work Procedure

SAVING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "CONFIGURATION (BCM): DESCRIPTION ".

NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

: GO TO 2.
REPLACE BCM
Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "CONFIGURATION (BCM): WORK PROCEDURE ".

: GO TO 4.
INITIALIZE BCM (NATS) (IF EQUIPPED)
Perform BCM initialization. (NATS)

: WORK END