LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Basic Inspection >> Mixture Ratio Self-Learning Value Clear >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

  1. START 

    With CONSULT 

    1. Start engine and warm it up to normal operating temperature.
    2. Select "SELF-LEARNING CONT" in "WORK SUPPORT" mode with CONSULT.
    3. Clear mixture ratio self-learning value by touching "CLEAR".

    With GST 

    1. Start engine and warm it up to normal operating temperature.
    2. Turn ignition switch OFF.
    3. Disconnect mass air flow sensor (bank 1) harness connector.
    4. Restart engine and let it idle for at least 5 seconds.
    5. Stop engine and reconnect mass air flow sensor (bank 1) harness connector.
    6. Select Service $03 with GST. Make sure DTC P0102 is detected.
    7. Select Service $04 with GST to erase the DTC P0102.

      : END

scientia non olet · About LEMON Manuals