| Work support |
This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT unit. |
| Self-diagnostic results |
Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly. |
| Data monitor |
Input/Output data in the ECM can be read. |
| CAN diagnostic support monitor |
The results of transmit/receive diagnosis of CAN communication can be read. |
| Active test |
Diagnostic Test Mode in which CONSULT drives some actuators apart from the ECMs and also shifts some parameters in a specified range. |
| DTC & SRT confirmation |
The status of system monitoring tests and the self-diagnosis status/results can be confirmed. |
| Function test |
This mode is used to inform customers when their vehicle requires periodic maintenance. |
| ECU part number |
ECM part number can be read. |