Work Procedure

STEP 1
Fully open the door window.

: GO TO 2.
STEP 2
Place a piece of food near fully closed position.

: GO TO 3.
STEP 3
Close door glass completely with AUTO-UP.

: GO TO 4.
STEP 4
Check the following conditions
- Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that glass does not rise not when operating the power window main switch while lowering.
  CAUTION:
  - Perform initial setting when auto-up operation or anti-pinch function does not operate normally.
  - Check that AUTO-UP operates before inspection when system initialization is performed.
  - Do not check with hands and other body parts because they may be pinched. Do not get pinched.
  - It may switch to fail-safe mode if open/close operation is performed continuously without full close. Perform initial setting in that situation. Refer to "WORK PROCEDURE ".
  : END