LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0456 To P1217 >> DTC P0643: Sensor Power Supply >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK GROUND CONNECTION 
    1. Turn ignition switch OFF.
    2. Check ground connection M95. Refer to Ground Inspection in "CIRCUIT INSPECTION ".

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair or replace ground connection.

  2. CHECK ACCELERATOR PEDAL POSITION SENSOR 1 POWER SUPPLY CIRCUIT 
    1. Disconnect accelerator pedal position (APP) sensor harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between APP sensor harness connector and ground.
      APP sensor Ground Voltage (V)
      Connector Terminal
      E112
      (Without ICC)
      E116
      (With ICC)      		 5 Ground Approx. 5

      Is the inspection result normal? 

      YES: GO TO  7.

      NO: GO TO 3.

  3. CHECK SENSOR POWER SUPPLY CIRCUITS 

    Check harness for short to power and short to ground, between the following terminals.

    ECM Sensor
    Connector Terminal Name Connector Terminal
    F101 43 Electric throttle control actuator (bank 2) F27 1
    44 Electric throttle control actuator (bank 1) F6 6
    F102 60 CMP sensor (PHASE) (bank 1) F5 1
    Manifold absolute pressure (MAP) sensor F50 1
    PSP sensor F35 3
    64 CMP sensor (PHASE) (bank 2) F18 1
    Battery current sensor E21 1
    M107 99 APP sensor E112
    (Without ICC)
    E116
    (With ICC)    		 5

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Repair short to ground or short to power in harness or connectors.

  4. CHECK COMPONENTS 

    Check the following.

  5. CHECK TP SENSOR 

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO  9.

    NO: GO TO 6.

  6. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR 
    1. Replace electric throttle control actuator. Refer to "REMOVAL AND INSTALLATION ".
    2. Go to "SPECIAL REPAIR REQUIREMENT ".

      : INSPECTION END

  7. CHECK APP SENSOR 

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO  9.

    NO: GO TO 8.

  8. REPLACE ACCELERATOR PEDAL ASSEMBLY 
    1. Replace accelerator pedal assembly. Refer to "REMOVAL AND INSTALLATION ".
    2. Go to "SPECIAL REPAIR REQUIREMENT ".

      : INSPECTION END

  9. CHECK INTERMITTENT INCIDENT 

    Refer to "INTERMITTENT INCIDENT ".

    : INSPECTION END

scientia non olet · About LEMON Manuals