Operation Condition

Power supply position

Engine start/stop condition

Push-button ignition switch operation frequency

Brake pedal

Selector lever position

LOCK → ACC

Not depressed

Any position

LOCK → ACC → ON

Not depressed

Any position

LOCK → ACC → ON → OFF

Not depressed

Any position

LOCK → START
ACC → START
ON → START
(Engine start)

Depressed

P or N position (⁽¹⁾)

1 [If the switch is pressed once, the engine starts from any power supply position (LOCK, ACC, and ON)]

Engine is running → OFF (Engine stop)

P position

Engine is running → ACC (Engine stop)

Any position other than P (⁽²⁾)

Engine stall return operation while driving

N position

⁽¹⁾	When the selector lever position is in the N position, the engine start condition is different according to the vehicle speed.

At a vehicle speed of less than 4 km/h (2.5 MPH), the engine can start only when the brake pedal is depressed.
At a vehicle speed of 4 km/h (2.5 MPH) or more, the engine can start even if the brake pedal is not depressed. (It is the same as "Engine stall return operation while driving".)

⁽²⁾	When the selector lever position is in any position other than the P position and when the vehicle speed is 5 km/h (3.1 MPH) or more, the engine stop condition is different.

Press and hold the push-button ignition switch for 2 seconds or more. (When the push-button ignition switch is pressed for too short a time, the operation may be invalid, so properly press and hold to prevent an incorrect operation.)
Press the push-button ignition switch 3 times or more within 1.5 seconds. (Emergency stop operation)