Push-Button Ignition Switch Operation Procedure: Notes

The power supply position changing operation can be performed with the following operations.

Operation Enable Condition

• When an Intelligent Key is within the detection area of inside key antenna or when it is inserted into the key slot, the operation is as per the following.
• When starting the engine, the BCM monitors the following engine start conditions,
  • Brake pedal operating condition
  • Selector lever position
  • Vehicle speed
• Unless each start condition is fulfilled, the engine will not respond regardless of how many times the engine switch is pressed. At that time, illumination repeats the position in the order of LOCK→ACC→ON→OFF.