Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor item (Unit) |
Remarks |
| WARNING LAMP (On/Off) |
Hybrid EPS (Electrical Power Steering) warning lamp control status is displayed. |
| STEERING ANGLE SENSOR STATUS (Abnormal/Normal) |
Steering angle sensor malfunction status is displayed from steering angle sensor via CAN communication. |
| HEV/ENGINE STATUS (STOP/RUN) |
Hybrid system start status is displayed from HPCM via CAN communication. |
| FLOW CONNECTION VALVE (OPEN/CLOSE) |
Displays the open/close status for flow connection valve. |
| BATTERY VOLT (V) |
Displays the power supply voltage for power steering control module. |
| STEERING TORQUE (Nm) |
Steering wheel turning force is displayed from torque sensor via CAN communication. |
| STEERING ANGLE SIGNAL (deg) |
Steering angle value is displayed from steering angle sensor via CAN communication. |
| Monitor item (Unit) |
Remarks |
| STEERING ANGLE SPEED (deg/s) |
Displays the steering angle speed calculated by the power steering control module. |
| MOTOR CURRENT (A) |
Displays the current value consumed by power steering motor. |
| MOTOR TORQUE COMMAND (Nm) |
Displays a target torque value of the power steering motor. |
| ASSIST LEVEL (%) |
Assist limit value is displayed for power steering motor. |
| VEHICLE SPEED (km/h or mph) |
Vehicle speed is displayed from combination meter via CAN communication. |
| MOTOR REVOLUTION SPEED (RPM) |
Displays the revolutions for power steering motor. |
| CONTROL MODULE ESTM TEMP (°C or °F) |
Displays a power steering motor drive circuit temperature estimated by the control module. |