RELAY CONTROL SYSTEM: System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
To prevent damage to the parts, IPDM E/R integrated relays cannot be removed.
| Control relay | Input/output | Transmit unit | Control part | Refer to | ||
|---|---|---|---|---|---|---|
| Headlamp low relay |
|
BCM (CAN) | Headlamp (LO) |
|
||
| Headlamp high relay | High beam request signal | BCM (CAN) | Headlamp (HI) | |||
| Front fog lamp relay | Front fog light request signal | BCM (CAN) | Front fog lamp | FRONT FOG LAMP SYSTEM | ||
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
|||
| Illumination | SYSTEM | |||||
|
Front wiper request signal | BCM (CAN) | Front wiper motor | SYSTEM | ||
| Front wiper position signal | Front wiper motor | |||||
|
|
BCM (CAN) |
|
VEHICLE SECURITY SYSTEM | ||
|
Starter control relay signal | BCM (CAN) | Starter motor | |||
| Steering lock unit condition signal | Steering lock unit | |||||
| Starter relay control signal | TCM | |||||
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (magnet clutch) | AUTOMATIC AIR CONDITIONING SYSTEM: AIR OUTLET CONTROL | ||
| Ignition relay | Ignition switch ON signal | BCM (CAN) | Each control unit, sensor, actuator and relay (ignition power supply) | SYSTEM DESCRIPTION | ||
| Vehicle speed signal | Combination meter (CAN) | |||||
| Push-button ignition switch signal | Push-button ignition switch | |||||
| Daytime running light relay |
|
BCM (CAN) |
|
AUTO LIGHT SYSTEM (WITH DTRL): SYSTEM DESCRIPTION | ||
|
NOTE:
|
||||||