Fuel Pressure Release

WITH CONSULT

1. Turn ignition switch ON.
2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT.
3. Start engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.

WITHOUT CONSULT

1. Remove fuel pump fuse in IPDM E/R.
   NOTE:

   • For the fuse number, refer to "WIRING DIAGRAM ".
   • For the fuse arrangement, refer to "CONNECTOR AND TERMINAL ARRANGEMENT ".
2. Start engine.
3. After engine stalls, crank it two or three times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.