Check Anti-Pinch Function
- Fully open door glass.
- Place a piece of wood near the fully closed position.
- Close door glass completely using AUTO-UP.
- Check that door glass lowers approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that door glass does not rise when operating power window main switch while lowering.
CAUTION:
- Perform initialization when AUTO-UP operation or anti-pinch function does not operate normally.
- Check that AUTO-UP operates before inspection when initialization is performed.
- Never check with hands or other body parts because they may be pinched. Never get pinched.
- Finish initialization. Otherwise, the next operation cannot be done.
- AUTO-UP operation
- Anti-pinch function
- Door key cylinder power window function